浏览全部资源
扫码关注微信
纸质出版日期： 2019-7 ，
录用日期： 2019-2-25
扫 描 看 全 文
常雅轩, 焦子锑, 董亚冬, 张小宁, 何丹丹, 尹思阳, 崔磊, 丁安心. 2019. Ross-Li核驱动模型热点参数化及其校正—以POLDER数据为例. 遥感学报, 23(4): 661–672
Chang Y X, Jiao Z T, Dong Y D, Zhang X N, He D D, Yin S Y, Cui L and Ding A X. 2019. Parameterization and correction of hotspot parameters of Ross-Li kernel driven models on POLDER dataset. Journal of Remote Sensing, 23(4): 661–672
半经验、核驱动二向性反射分布函数(BRDF)模型是多角度遥感领域的一个重要模型，其热点效应在应用BRDF反演其它地表参数时有重要作用。本研究针对树冠内部叶片的间隙对热点的影响，对几何光学核的重叠函数进行热点效应的改进，并利用POLDER多角度观测数据集，对改进热点效应后的不同核函数组合模型的最优热点参数进行了确定。通过最小均方根误差(RMSE)筛选出最优热点参数，进一步分析不同模型对热点参数的敏感性和RMSE随热点参数的变化情况。结果表明：(1)该热点参数化方法可用于Ross-Li核驱动模型不同核函数组合的情况，热点校正后的模型相对于原模型很好地改善了对热点反射率的拟合能力；(2)热点参数最优值在几何光学核为LSRC (LiSparseRChen)与LDRC (LiDenseRChen)组成的模型中出现明显差别，
C
1
在LDRC模型中的值远小于LSRC模型，主要是因为LDRC核函数自身较好考虑了树冠尺度下的热点效应，所以该热点参数改进方法起到的补偿作用较小；(3)总体上，同一模型的
C
1
参数比
C
2
参数对热点的变化更敏感。本研究为Ross-Li核驱动模型的热点效应进一步校正及热点参数的取值范围提供了依据，对Ross-Li模型的推广有重要意义，改进热点效应后的模型可用于未来国产多角度卫星的数据处理流程中，以获取加精确的地物热点反射率信息。
The semi-empirical kernel-driven linear bidirectional reflectance distribution function (BRDF) model is important and has been widely used in the remote sensing community. The hotspot signature is an important characteristic of the BRDF shapes and is commonly quantified by two degrees of freedom: the hotspot height and width near the hotspot direction. This research aimed to correct the hotspot effect of the Ross–Li BRDF model for potential users by correcting the Ross and Li kernels with an exponential function of two hotspot parameters (
C
1
/
C
2
). This method has been developed in previous studies
but it was comprehensively applied to other kernel functions in the current study. Given the gap between leaves in the canopy
we corrected the overlap function of GO kernel with hotspot function. We analyzed the two hotspot parameters for the Ross–Li model by using the entire archive of POLDER BRDF database. First
we used six combinations of Ross and Li kernels to fit a typical single POLDER data for a specific analysis. We also analyzed the sensitivity of
C
1
/
C
2
for these model combinations using the single POLDER pixel. Second
we used the entire POLDER dataset and acquired the optimum values of the hotspot parameters by using the root mean square error (RMSE) method. Finally
we analyzed the sensibility of the hotspot parameter in each model using 2D contour plots that distinctly show the variations in RMSEs as functions of
C
1
and
C
2
. (1) The proposed hotspot parameterization method could be used to various combination models of Ross and Li kernels. The model with such a hotspot correction method improved the fitting ability of the hotspot signature better than the original model. (2) The optimum values of two hotspot parameters were significantly different between models
especially for the two geometric optical kernels
namely
LiSparseRChen
(
LSRC
) and
LiDenseRChen
(
LDRC
). The value of
C
1
parameters in the
LDRC
models was generally smaller than that in the
LSRC
models. The possible reason could be that the
LDRC
kernel function modeled the hotspot effect on the canopy scale accurately
such that the role of the hotspot parameters (especially for
C
1
) was secondary in this situation. (3) In general
the value of the
C
1
parameter in a single model was more sensitive to the variation in hotspot effect than the
C
2
parameter. This study comprehensively corrects the hotspot effect of the Ross–Li model for various applications for potential users who pay attention to the hotspot signatures of their applications. This study is also valuable for domestic multi-angle satellites in accurately reconstructing future hotspot signatures from multi-angle observations.
遥感BRDF核驱动模型热点参数校正POLDER数据敏感性分析
remote sensingBRDFkernel-driven modelcalibration of hotspot parametersPOLDER dataanalysis of sensibility
Bréon F M. 2005. Parasol Level-1 product data format and user manual. Paris: CNES: 2-8
Bréon F M and Maignan F. 2017. A BRDF–BPDF database for the analysis of earth target reflectances. Earth System Science Data, 9(1): 31–45
Bréon F M, Maignan F, Leroy M and Grant I. 2002. Analysis of hot spot directional signatures measured from space. Journal of Geophysical Research: Atmospheres, 107(D16): AAC 1-1–AAC 1-15
Canisius F and Chen J M. 2007. Retrieving forest background reflectance in a boreal region from multi-angle imaging spectroradiometer (MISR) data. Remote Sensing of Environment, 107(1/2): 312–321
Chen J M and Cihlar J. 1997. A hotspot function in a simple bidirectional reflectance model for satellite applications. Journal of Geophysical Research: Atmospheres, 102(D22): 25907–25913
Chen J M, Menges C H and Leblanc S G. 2005. Global mapping of foliage clumping index using multi-angular satellite data. Remote Sensing of Environment, 97(4): 447–457
Deschamps P Y, Breon F M, Leroy M, Podaire A, Bricaud A, Buriez J C and Seze G. 1994. The polder mission: instrument characteristics and scientific objectives. IEEE Transactions on Geoscience and Remote Sensing, 32(3): 598–615
Dong Y D, Jiao Z T, Yin S Y, Zhang H, Zhang X M, Cui L, He D D, Ding A X, Chang Y X and Yang S T. 2018. Influence of snow on the magnitude and seasonal variation of the clumping index retrieved from MODIS BRDF products. Remote Sensing, 10(8): 1194
Dong Y D, Jiao Z T, Zhang H, Bai D N, Zhang X N, Li Y and He D D. 2016. A visualization tool for the kernel-driven model with improved ability in data analysis and kernel assessment. Computers and Geosciences, 95: 1–10
董亚冬, 焦子锑, 张虎, 李佳悦, 焦广平, 石涵予. 2014. 改善MODIS BRDF产品热点效应的方法研究. 遥感学报, 18(4): 804–825
Dong Y D, Jiao Z T, Zhang H, Li J Y, Jiao G P and Shi H Y. 2014. Efficient algorithm for improving the hotspot effect of the operational MODIS BRDF product. Journal of Remote Sensing, 18(4): 804–825
He L M, Chen J M, Pisek J, Schaaf C B and Strahler A H. 2012. Global clumping index map derived from the MODIS BRDF product. Remote Sensing of Environment, 119: 118–130
Hill M J, Román M O, Schaaf C B, Hutley L, Brannstrom C, Etter A and Hanan N P. 2011. Characterizing vegetation cover in global savannas with an annual foliage clumping index derived from the MODIS BRDF product. Remote Sensing of Environment, 115(8): 2008–2024
Huang X Y, Jiao Z T, Dong Y D, Zhang H and Li X W. 2013. Analysis of BRDF and albedo retrieved by kernel-driven models using field measurements. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 6(1): 149–161
Jiao Z T and Dong Y D. 2018. A method to enhance the geometric-optical kernel for further improving hotspot effect in MODIS BRDF model//Proceedings of the 2018 IEEE International Geoscience and Remote Sensing Symposium. Valencia, Spain: IEEE: 1715-1718 [DOI: 10.1109/IGARSS.2018.8517916]
Jiao Z T, Dong Y D, Schaaf C B, Chen J M, Román M, Wang Z S, Zhang H, Ding A X, Erb A, Hill M J, Zhang X N and Strahler A. 2018. An algorithm for the retrieval of the clumping index (CI) from the MODIS BRDF product using an adjusted version of the kernel-driven BRDF model. Remote Sensing of Environment, 209: 594–611
Jiao Z T, Schaaf C B, Dong Y D, Román M, Hill M J, Chen J M, Wang Z S, Zhang H, Saenz E, Poudyal R, Gatebe C, Bréon F M, Li X W and Strahler A. 2016. A method for improving hotspot directional signatures in BRDF models used for MODIS. Remote Sensing of Environment, 186: 135–151
焦子锑, 李小文, 王锦地, 张虎. 2011. 评估MODIS的BRDF角度指数产品. 遥感学报, 15(3): 432–456
Jiao Z T, Li X W, Wang J D and Zhang H. 2011. Assessment of MODIS BRDF shape indicators. Journal of Remote Sensing, 15(3): 432–456
Jupp D L B and Strahler A H. 1991. A hotspot model for leaf canopies. Remote Sensing of Environment, 38(3): 193–210
Lacaze R, Chen J M, Roujean J L and Leblanc S G. 2002. Retrieval of vegetation clumping index using hot spot signatures measured by polder instrument. Remote Sensing of Environment, 79(1): 84–95
Leblanc S G, Chen J M, White H P, Latifovic R, Lacaze R and Roujean J L. 2005. Canada-wide foliage clumping index mapping from multiangular polder measurements. Canadian Journal of Remote Sensing, 31(5): 364–376
Li X and Strahler A H. 1992. Geometric-optical bidirectional reflectance modeling of the discrete crown vegetation canopy: effect of crown shape and mutual shadowing. IEEE Transactions on Geoscience and Remote Sensing, 30(2): 276–292
Li X W, Gao F, Chen L Z and Strahler A H. 1999. Derivation and validation of a new kernel for kernel-driven BRDF models//Proceedings Volume 3868, Remote Sensing for Earth Science, Ocean, and Sea Ice Applications. Florence, Italy: SPIE: 368-380 [DOI: 10.1117/12.373123]
Lucht W and Lewis P. 2000. Theoretical noise sensitivity of BRDF and albedo retrieval from the EOS-MODIS and MISR sensors with respect to angular sampling. International Journal of Remote Sensing, 21(1): 81–98
Lucht W, Schaaf C B and Strahler A H. 2000. An algorithm for the retrieval of albedo from space using semiempirical BRDF models. IEEE Transactions on Geoscience and Remote Sensing, 38(2): 977–998
Maignan F, Bréon F M and Lacaze R. 2004. Bidirectional reflectance of earth targets: evaluation of analytical models using a large set of spaceborne measurements with emphasis on the hot spot. Remote Sensing of Environment, 90(2): 210–220
Mõttus M, Sulev M and Lang M. 2006. Estimation of crown volume for a geometric radiation model from detailed measurements of tree structure. Ecological Modelling, 198(3/4): 506–514
Nicodemus F E, Richmond J C, Hsia J J, Ginsberg I W and Limperis T. 1977. Geometrical considerations and nomenclature for reflectance. NBS Monograph 160, Washington D.C.
Pisek J, Chen J M, Lacaze R, Sonnentag O and Alikas K. 2010. Expanding global mapping of the foliage clumping index with multi-angular polder three measurements: evaluation and topographic compensation. ISPRS Journal of Photogrammetry and Remote Sensing, 65(4): 341–346
Pisek J, Chen J M and Nilson T. 2011a. Estimation of vegetation clumping index using MODIS BRDF data. International Journal of Remote Sensing, 32(9): 2645–2657
Pisek J, Lang M, Nilson T, Korhonen L and Karu H. 2011b. Comparison of methods for measuring gap size distribution and canopy nonrandomness at Jörvselja RAMI (radiation transfer model intercomparison) test sites. Agricultural and Forest Meteorology, 151(3): 365–377
Pisek J, Ryu Y, Sprintsin M, He L M, Oliphant A J, Korhonen L, Kuusk J, Kuusk A, Bergstrom R, Verrelst J and Alikas K. 2013. Retrieving vegetation clumping index from multi-angle imaging spectroradiometer (MISR) data at 275 m resolution. Remote Sensing of Environment, 138: 126–133
Roujean J L, Leroy M and Deschamps P Y. 1992. A bidirectional reflectance model of the earth’s surface for the correction of remote sensing data. Journal of Geophysical Research: Atmospheres, 97(D18): 20455–20468
Schaaf C B, Gao F, Strahler A H, Lucht W, Li X W, Tsang T, Strugnell N C, Zhang X Y, Jin Y F, Muller J P, Lewis P, Barnsley M, Hobson P, Disney M, Roberts G, Dunderdale M, Doll C, D’Entremont R P, Hu B X, Liang S L, Privette J L and Roy D. 2002. First operational BRDF, albedo nadir reflectance products from MODIS. Remote Sensing of Environment, 83(1/2): 135–148
Schlerf M and Atzberger C. 2006. Inversion of a forest reflectance model to estimate structural canopy variables from hyperspectral remote sensing data. Remote Sensing of Environment, 100(3): 281–294
Wanner W, Li X and Strahler A H. 1995. On the derivation of kernels for kernel-driven models of bidirectional reflectance. Journal of Geophysical Research: Atmospheres, 100(D10): 21077–21089
Wanner W, Strahler A H, Hu B, Lewis P, Muller J P, Li X, Schaaf C L B and Barnsley M J. 1997. Global retrieval of bidirectional reflectance and albedo over land from EOS MODIS and MISR data: theory and algorithm. Journal of Geophysical Research: Atmospheres, 102(D14): 17143–17161
Wei S S and Fang H L. 2016. Estimation of canopy clumping index from MISR and MODIS sensors using the normalized difference hotspot and darkspot (NDHD) method: the influence of BRDF models and solar zenith angle. Remote Sensing of Environment, 187: 476–491
Zhu G L, Ju W M, Chen J M, Gong P, Xing B L and Zhu J F. 2012. Foliage clumping index over China’s landmass retrieved from the MODIS BRDF parameters product. IEEE Transactions on Geoscience and Remote Sensing, 50(6): 2122–2137
相关作者
相关机构
京公网安备11010802024621